Hangzhou Xinabo Intelligent Electromechanical Technology Co., Ltd manufactures cordless power tools as the battery-powered part of our Engineering Construction Pipeline Connection Solutions range. Alongside threading machines, cold saws and tightening equipment, these tools cover the work that surrounds a pipe connection: drilling anchors, punching supports, cutting and crimping cable, dressing welds, bolting flanges and finishing installed pipework.
We are a Cordless Power Tools manufacturer based in Hangzhou, Zhejiang, China. The range runs on 18V and 21V lithium-ion platforms with brushless motors, and it is supplied to contractors, plant maintenance teams and distributors working on fire protection, building services, municipal and industrial piping projects.
How the Cordless Range Fits a Pipeline Workflow
As a Engineering Construction Pipeline Connection Solutions manufacturer, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.
A pipe connection is only as good as the work around it. Hangers need anchor holes in concrete soffits, cable trays and pipe supports need punched holes in channel steel, power and control cable needs clean cutting and crimping, and flanged joints need controlled torque. Our cordless tools are grouped so one battery platform covers those tasks without trailing leads or a generator on the floor.
- Fire protection: overhead anchor drilling, support punching, sprinkler main installation and bracket work.
- Building services and plumbing: pipe support fabrication, wall penetration drilling and fixture bolting.
- Electrical and power construction: Cu/Al cable cutting, terminal crimping and cable tray assembly.
- Municipal and industrial maintenance: flange bolting, weld dressing, surface preparation and touch-up coating.
Our Cordless Range and Where Each Tool Type Fits
Ten tool families make up the cordless range. Each one is configured around a working point — material, thickness or diameter, duty cycle and access — rather than sold as a single fixed specification.
| Tool family |
Typical application |
Main configuration variables |
| Backpack Lithium Battery Pack |
Continuous runtime for 21V–60V tools on site |
20Ah/30Ah capacity, output interfaces, fourfold protection |
| Brushless Angle Grinder |
Weld dressing, pipe surface preparation, cut-off work |
Disc diameter, spindle thread, guard type, no-load speed |
| Brushless Circular Saw |
Panels, profiles and pipe cutting on site |
140mm blade, 45mm max depth, 0–45° bevel, laser guide |
| Brushless Electric Chainsaw |
Formwork timber, site clearance and trenching support |
Bar length, chain pitch, oiling system, battery class |
| Lithium Hydraulic Cutter |
Cu/Al cable cutting and terminal crimping |
60–120kN force, 10–400mm² terminals, up to 50mm cable |
| Lithium-Ion Brushless Hammer Drill/Driver |
Anchors, brackets, light masonry and screwdriving |
100–140N·m torque, hammer/drill dual mode, two speeds |
| Lithium-Ion Brushless Rotary Hammer |
Concrete and stone drilling, chiselling, renovation |
1.7J / 2.8J / 4.5J impact energy, SDS-plus, three modes |
| Lithium-Ion Brushless Wrench |
Flange, support and structural bolting |
350–850N·m torque, drive size, speed settings |
| Lithium-Ion Hole Puncher |
Channel steel, angle steel, cable tray and supports |
80kN force, φ6–φ20mm range, die set, extended body |
| Lithium-Ion Spray Gun |
Coating and touch-up on installed pipework |
Nozzle set, flow setting, container volume, fluid type |
Battery Platform, Runtime and Backpack Power
The range is organised around two lithium-ion platforms so that crews can standardise chargers, packs and tools across a project. Where a handheld pack is the limiting factor, the Backpack Lithium Battery Pack moves the energy off the tool and onto the operator.
- 20Ah and 30Ah backpack configurations with multiple output interfaces for 21V–60V tools.
- Fourfold protection covering overcharge, over-discharge, short circuit and overheat.
- Waterproof and dustproof construction with adjustable shoulder straps for long wear periods.
- Designed to reduce downtime from repeated handheld battery swaps on extended operations.
Materials, Capacity and Working Envelope
Capacity is quoted against the material actually being worked, because the same tool behaves differently in mild steel, stainless and aluminium. The figures below are the working envelopes we configure against.
- Concrete and stone: rotary hammers from 1.7J up to 4.5J impact energy, with SDS-plus quick-change chucks on the XJ.709 and XJ.728 models.
- Channel and angle steel: 80kN punching force across a φ6–φ20mm range, with an extended body for continuous punching along long sections.
- Cu/Al cable: crimping from 10mm² to 400mm² terminals at 60–120kN, and spiral cutting of cable up to 50mm diameter.
- Wood, panels and plastics: 140mm blade circular saw with 45mm maximum cutting depth and 0–45° bevel adjustment.
- Bolted joints: impact wrenches from 350N·m to 850N·m, with 1/2-inch square drive on the XJ.570.
Brushless Motors, Controls and Safety Functions
Brushless motors are used across the range for runtime and service life rather than headline power alone. The high-magnetic motors in the XJ.709 and XJ.728 rotary hammers are rated at roughly 30% higher torque and 20% lower energy consumption than standard brushless equivalents, and the intelligent control system on the XJ.728 adjusts output to load resistance.
- Triple and fourfold protection sets: overheat, overload, under-voltage and, on the backpack pack, short circuit.
- Automatic pressure relief after crimping and punching to protect dies, terminals and the tool body.
- Safety lock against accidental start on the cable cutter; anti-kickback guard on the circular saw.
- Gyroscopic anti-kickback control on the XJ.608 hammer drill/driver, reducing reaction force under resistance.
- Vibration-damped handles, LED work lights, one-touch forward/reverse and power-off memory on selected models.
Quality Control, Documentation and Acceptance
Our cordless tools are produced in the same facility as our Pipe Fabrication & Installation Equipment, in a 10,000m² plant in Xiaoshan, Hangzhou. The company holds more than 30 patents across invention, utility model and design categories, and has been recognised as a National High-tech Enterprise.
- Machinery Directive and Electromagnetic Compatibility Directive attestation of conformity within our certification set.
- Product certificates issued with the relevant tool families.
- Function checks on motor, control electronics, hydraulic pressure and safety interlocks before packing.
- Packing list, model and serial identification, and operating documentation supplied with each consignment.
Information We Use to Configure Your Solution
A cordless tool proposal is only accurate when it is built on the real working point. These are the inputs we ask for when preparing a configuration and quotation.
- Material and grade: concrete strength class, steel section type, cable conductor and insulation, panel material.
- Dimensions: hole diameter and plate thickness, cable diameter and terminal size, bolt size and target torque.
- Duty cycle: holes, punches, cuts or fastenings per shift, and whether work is continuous or intermittent.
- Access conditions: overhead work, confined spaces, working height, and whether a backpack pack is practical.
- Platform preference: 18V or 21V, existing battery inventory, and charger voltage and plug type.
- Tooling: die sets, blades, chains and nozzles required for the first project.
- Documentation and labelling requirements for the destination market.
- Delivery scope, packing format and quantity split across tool families.
Tooling, Spare Parts and Serviceability
Consumables and wear parts determine how long a cordless tool stays productive on site. We supply the die sets, blades, chains, batteries and chargers that match the tools in the range, and our technical team provides demonstrations and training for buyer partners on request.
The Lithium Hydraulic Cutter family illustrates the approach: rotatable heads for awkward angles, interchangeable dies for quick size changes, and hydraulic overload protection that stops the tool before the die or terminal is damaged. The same logic — accessible wear parts, protected mechanisms, clear operating limits — runs through the rest of the cordless range.
Frequently Asked Questions
Which battery platforms do Xinabo cordless tools use?
Our cordless tools run on 18V and 21V lithium-ion platforms. The 18V platform covers the hydraulic crimping tool and industrial cable cutter; the 21V platform covers the rotary hammers, hammer drills, impact wrenches, hole puncher, circular saw and the remaining tool families. Chargers and packs are matched to the platform selected for the project.
Can one backpack battery run several tools during a shift?
Yes. The backpack pack is available in 20Ah and 30Ah configurations with multiple output interfaces, and it is designed to power several 21V–60V tools in sequence. Fourfold protection covers overcharge, over-discharge, short circuit and overheat, and the housing is waterproof and dustproof for outdoor use.
What is the punching capacity of the lithium-ion hole puncher?
The 21V hole puncher delivers 80kN of hydraulic force across a φ6–φ20mm punching range in channel steel, angle steel and steel plate. The extended body is designed for continuous punching along long channel sections, and a positioning scale helps hold hole spacing. Interchangeable dies allow size changes, and hydraulic overload protection with automatic pressure relief protects the dies and tool body.
How do you match an impact wrench to a bolting task?
We match on target torque, bolt size and access. The range spans 350N·m, 550N·m, 750N·m and 850N·m models with three or four adjustable torque settings, so a crew can separate light assembly from heavy structural bolting. The XJ.570 uses a 5220 brushless motor with a planetary gear impact mechanism and up to 3200 impacts per minute, and intelligent power-off protection stops the tool once the bolt is fully tightened.
What documentation and spare parts support comes with an order?
Consignments are supplied with product certificates, packing lists and operating documentation, and our certification set includes Machinery Directive and Electromagnetic Compatibility Directive attestation of conformity. Spare parts including dies, blades, chains, batteries and chargers are available for the tool families we supply, and our technical team provides demonstrations and training for buyer partners on request.
What do you need from us to prepare a cordless tool quotation?
Send the material and grade, the dimensions being worked, the number of operations per shift, the access conditions, the preferred battery platform and the tooling required for the first project. With those inputs we confirm the tool family, model, battery and charger configuration, die or blade set, documentation scope and packing format in a single proposal.
English
Español
عربى
